Cnc Can You Program a Increasing Feed Rate
What is the F code used for in CNC programming?
The F code, or feedrate command controls how fast the tool advances in a machining process.
It controls the speed at which the tool will remove material while cutting.
Every G code program needs to control the feed rate by setting an F value. This includes milling, drilling, lathes, routers, and so on.
The feed rate needs to be adjusted depending on the needs of the cutting process. For example, the feed rate for machining aluminum will be different form the feed rate needed for hardened steel and so on.
Choosing the correct feed rate can mean the difference between a perfect part and a pile of scrap.
Want to learn more about CNC G Code?
F code structure
The format for an F command is F3.0
Unlike some other commands, the feed rate code allows the use of decimal points.
The F code should be used with a G code that sets the units of the feed rate.
This will be either G94 or G95 for milling machines or G98 or G99 for lathes.
Codes for setting feedrates
There are two types of feed rates that can be selected and the codes used vary between machine types.
On milling machines:
G94 code: Sets the feedrate to inches or millimeters per minute.
G95 code: Sets the feedrate to inches or millimeters per revolution.
On lathe machines:
G98 code: Sets the feedrate to inches or millimeters per minute.
G99 code: Sets the feedrate to inches or millimeters per revolution.
Feedrate units
Feedrate per minute (mm/min or in/min)
This type of feed rate sets the distance that the cutting tool will travel in 60 seconds. It is especially useful in milling operations and does not depend on the spindle speed.
For imperial (inch) system units, the feed rate value contains one decimal place. For example, a feedrate of 12.5 inches per minute would be F12.5.
For metric (mm) system units, the feed rate value contains one decimal place, even if it is a whole number. For example, a feed rate of 200 mm per minute would be F200.0
Feedrate per revolution (mm/rev or in/rev)
This type of feed rate sets the distance the cutting tool will travel in one spindle revolution (rotation).
In imperial units, the feed rate number allows four decimals, while in metric units it allows only three decimals.
For example, a feed rate of 0.32945 mm/rev will be programmed as F0.329 and a feed rate of 0.08457 in/rev will be programmed as F0.0846 on most controls.
Most CNC machines can work with both types of feed rate. However, feed rate per revolution is commonly used when working with a lathe and machining centers (mills) tend to stick with feed rate per minute.
Which other codes does the F command affect?
F codes affect the feed rates used when using various movement G codes such as G01, G02 and G03. Rapid travel with G00 is not affected.
Feed rates also affect canned cycles such as G81, G83 and G85.
Factors that affect the optimal feedrate
Cutting tool material and shape
The tool material and shape are determining factors when setting the feedrate in your CNC machine. The size of the tool will directly affect the milling, turning, or drilling process in terms of motion and machining time.
Also, the tool material affects cutting speeds and feed rates.
High-speed steel tools support less friction, which means they generally don't allow high feed rates and speeds.
Carbide and ceramic tools have better resistance and can be used at high speeds to increase machining efficiency.
The shape of the cutter and the angle of the tool also affect the cutting efficiency, and therefore the feed rate and speed.
Sharpened tools are ideal for reducing friction and chip load formation during cutting processes.
Workpiece material
Workpiece material has a similar affect to cutting tool material on feed rates. The harder the material is, the more difficult it would be to cut it. Softer materials allow the fastest speeds and rates.
Machine condition
Backlash or wear are common in older machines which can require decreased feed rates and spindle speeds for safety reasons.
Spindle speeds
The speed of the spindle plays an important role in determining the best feed rate. They don't call it speeds and feeds for nothing.
There are many tables available online that suggest good starting points for picking the best spindle speed for different materials and machining processes.
Depth of cut
It should go without saying but if the depth of the cut and the feed rate are large, then the friction will increase causing tool damage.
In these cases, the cutting speed should be reduced. A careful balance needs to be maintained between cutting tool life and total machining time.
Width of cut
The width of the cut affects chip thinning during the machining process. Usually, increasing feed rates can decrease this effect and promote user safety.
How to calculate the feedrate
Figuring out your feed rate might mean doing other calculations first depending on what information you know.
You might need to switch between feed rate units or calculate the feed rate using the spindle speed.
Formulas for switching between units
In the formulas below, the following abbreviations are used:
- mm/min = millimeters per minute
- rev/min = revolutions per minute
- Nt = number of teeth on the tool
Feedrate in (mm/min) = Feedrate in (rev/min)*Nt*RPM
Feedrate in (rev/min) = Feedrate (mm/min) / (Nt*RPM)
Calculating feedrates
The formula for calculating feed rate is Fc = (*D*S)/1000
To calculate the cutting feed rate, you need to consider the variables shown below too:
- Fc = cutting feedrate
- D = Diameter of rotating part (job or workpiece)
- S = spindle feed
Always be careful to stay consistent with your units.
If you choose to work with imperial units, all the parameters involved in the equation need to be in imperial units. The same with working with metric units.
How to choose the appropriate feedrate
Many machinists struggle with establishing the appropriate feedrate for given machines and materials, and rightfully so considering all the factors involved.
Many rely on online databases, manufacturing catalogs, and CNC books such as Machinery's Handbook or FANUC control guides.
There are also tables available online with feed rates and speeds according to the tool material, workpiece material, machine and controls used that can serve as a starting point.
Others use CAM software to get a hint of the speeds and rates needed for different machining operations.
And some experienced machinists have trained their ears to set the correct feedrate as a rule of thumb. This is a less accurate method and can easily lead to errors.
Whichever option you choose, it is important to have some guidelines for feeds. Here are a few tips:
- Increase the cutting speed by following this sequence: carbon steel < speed steel < c arbide. Carbide is the tool material that allows the highest speed.
- Increase the cutting speed by following this sequence: steel < iron < aluminum < lead. Lead is the workpiece material that allows the highest speed.
- Use the manufacturers specifications and charts to adjust the feed rates and speeds. The manufacturers have likely done extensive testing.
- You will usually be given a range of speeds and feeds depending on the tool and workpiece materials. Keep in mind that most of the time slower rates will mean longer tool life and less overheating.
Ways to change the current feedrate
Feedrate override
The feedrate override is a switch that can change the programmed feed rate from 0 to 200 percent. The feed-rate override switch is located on the CNC control panel and it's operated manually by the setup person or operator to slow (or stop) cutting motions.
Although feedrate override is useful in certain situations, you need to be careful to avoid tool overheating or breakage when using it.
Want to learn more about CNC G Code?
Source: https://www.machinistguides.com/f-code/
0 Response to "Cnc Can You Program a Increasing Feed Rate"
Post a Comment